TREMproof® 201/60 is a high-solids, VOC compliant, modified polyurethane waterproofing membrane. It is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel. (Trowel grade intended for detailing work only).
TREMproof 201/60 are suitable for backfilled walls, between slab and planter applications.
S/L = Self-Leveling, R = Roller Grade, and T = Trowel Grade.
TREMproof 201/60 may be applied at temperatures below 40°F (5°), however, all substrates must be clean, dry and frost-free. It is Tremco’s best recommendation to apply products when substrate and ambient temperatures are at 40°F (5°) and rising. Please note the following when applying these products at temperatures below 40°F (5°).
Special Note: TREMproof 201/60 can freeze while in the pail but it will make them both very difficult to apply to the substrate and will significantly increase cure times.
Use of a drainage mat reduces hydrostatic head pressure, affords protection to the membrane and better directs water to the perforated foundation drainage system. Combining a drainage mat with a Tremco below-grade waterproofing membrane typically qualifies for extended warranties.
TREMproof 201/60 meet or exceed all minimum performance requirements of ASTM C 836.
TREMproof 201/60 requires a minimum of 14 days, (moisture testing required), preferably 28 days.
60 mils.
Spraying of TREMproof 201/60 is not recommended. If a sprayable membrane is preferred or required, TREMproof 260 may be a suitable alternative. Please consult with Technical Service.